ELIMINATES NEED FOR MACHINE SCRUBBING… A new, innovative, deep penetrating stripper that needs no machine scrubbing. Simple mop agitation dissolves the toughest metal interlock finishes, permitting fast pick-up with mop or wet vac.
ELIMINATES RINSING… No neutralizing rinse is necessary... leaves the floor ready for a new application of floor finish.
SAVES TIME AND LABOR… Since 90% of most stripping tasks are labor, this product can cut costs dramatically. Overall stripping time may actually be cut in half.
GENERAL DIRECTIONS FOR USE
1. Dilute from 1:4 to 1:10 with warm water as follows:
a. Regular build-up .................................1:10
b. Heavy build-up ...................................1:5
c. Burnished build-up .............................1:4
Test product in a small area to determine most effective dilution and to insure compatibility.
2. Apply liberally to small area of floor, making sure surface remains wet until removed.
3. Allow to remain approximately 3 to 5 minutes, then agitate with mop or machine agitate with appropriate pad. Wait an additional 3 to 5 minutes, then simply pick up with mop, vac or automatic scrubber.
4. Allow floor to completely dry. If slight amount of dust, stripper or squeegee marks remain on surface, remove with plain water wet mop.
SAFETY DATA Harmful or fatal if swallowed. May cause skin or eye damage if not promptly treated. Wear eye protection and resistant (rubber) gloves when handling. May cause respiratory tract irritation, if inhaled. Use only with adequate ventilation. Avoid breathing vapor, spray or mist. If necessary to prevent exposure, wear approved respiratory protection. Combustible.