INVADER
Is formulated for penetration, corrosion prevention, lubrication, and metal cleaning. This product is very aggressive in loosening '`frozen" mechanical parts by quickly penetrating corrosion, rust, and moisture. Once in place, it attacks the oxides binding the parts together, and also leaves a film of lubrication to assist is dismantlement. INVADER TMwill also protect electrical gear, metal, and other surface from deterioration by displacing water and moisture, and then sealing the surfaces with a molecular film. It is safe to use on energized electrical equipment, as it is non-conductive up to 29,000 volts and non-flammable. It will actually protect the conductivity of commutators and contacts.
TYPICAL APPLICATIONS:
*Nut/Bolt Separation
*Corroded Valve actators and other Corroded Parts
*Door Hinges
*Locks
*Wire Cable
*Moisture displacement
DIRECTIONS FOR USE:
Apply liberally to threaded material, tightly fitted parts, sliding and rotating parts, bolts, hinges, and pins which have been °frozen " by corrosion. Reapply periodically as needed. Can be used on either wet or dry surfaces.
WARNING:
Use only in well ventilated areas. Avoid prolonged breathing of vapor. Avoid contact with eyes and prolognecl contact with skin. In case of eye contact, flush thoroughly with water If irritation persist, get medical attention. For industrial use only. Consult Material Safety Data Sheet for more information.
PACKAGING INFO:
CH011 -CS 12 18OZ CANS
CH011 -CYF 1 QUART CONTAINER
CH011-01 6-1 GALLON CONTAINERS
CH011-05 5 GALLON STAK-N-PAK
CH011-20 20 GALLON DRUM
CH011-55 55 GALLON DRUM
CH011-275 275 GALLON TOTE