PRO-TEKT:
An 24% solids, water and scuff resistant, high gloss floor finish_ Drys to a beautiful luster without powdering headaches_ Very good resistance to black-mark and scuffs_ Can be cleaned or even scrubbed over and over without sacrifice to gloss or appearance. Holds up to daily burnishing and eliminates the need for constant touch ups.
HMIS:
HEALTH 1
FLAMMABILITY 0
REACTIVITY 0
PERSONAL A
No hazardous ingredients per 29CFR 1910.1200
DIRECTIONS:
Thoroughly clean the floor using a concentrated stripper and water. Rinse thoroughly with clear water. Apply the coating with a lamb's wool applicator, roller, string, or wedge mop. If dull spots appear after drying, apply another coat. Buffing is not recommended_ If buffings is desired use a brush or bonnet (not steel wool). To spray buff. use an equal solution of water and Pro-Tekt.
Coverage: 1500 to 2000
Drying Time: 2010 30 minutes
CAUTION:
May be irritating to the eyes or skin with some individuals.
FIRST AID:
If ingested in large quantities, induce vomiting and seek medical attention_ For eye contact, immediatley flush with water, holding the eyelid apart to ensure complete irrigation
PACKAGING INFO:
Part # Desc:
CH046-QT 1 quart container
CH046-01 6-1 gallon containers
CH046-05 5 gallon Stak-n-Pak
CH046-20 al gallon drum
CH046-55 55 gallon drum
CH046-275 275 Gallon Tote
PACKAGING INFO:
Part # Desc:
CH046-QT 1 quart container
CH046-01 6-1 gallon containers
CH046-05 5 gallon Stak-n-Pak
CH046-20 al gallon drum
CH046-55 55 gallon drum
CH046-275 275 Gallon Tote