SUPER S.E.:
*Grease traps
*Septic tanks
*Drain Lines
*Portable toilets
*Carpet cleaning
PACKAGING INFORMATION: Part # Description CH066-QT 1 quart Container CH066-01 6-1 gallon Containers CH066-05 5 gallon Stak-n-pak CH066-20 20 Gallons Drum CH066-55 55 Gallon Drum CH066-275 275 Gallon Tote
|
CAUTION:
KEEP OUT OF REACH OF CHILDREN. Do not take internally. Avoid getting into eyes or open wounds. Keep out of sunlight. Avoid exposure to extremely hot or boiling water, disinfectants, or chlorinated compounds
DIRECTIONS FOR USE:
Drain lines and down pipes:
Use 2 to 4 times weekly depending on facility usage. Add product in amounts listed below, starting at the lowest floor and working up at a rate of one floor per day. Do not treat the same floor twice. When the top floor is reached, continue treatment from the top floor only. Apply 4 oz. per 2" of pipe (i.e. 6" pipe = 12oz.) If using a sulfuric acid drain opener, apply Super S.E. after teh sulfuric acid. This flushes the system completely, activates the natural digestive processes, prevents future cloggin, and eliminates Hydrogen Sulfide.
Grease Traps:
For trapps with less than 20 cubic feet capacity, add 4-5oz. daily by pouring in a sink or pipeline closest to trap. This should be done at night or when the traps are used the least. After adding, flush down with a cup of lukewarm water. For grease trapss larger than 20 cubic feet, add 8-10 oz. daily using the same procedure.
Septic tanks:
Add 1 part per 25 cubic feet capacity (7.5 gal/cu.ft.) for the initial treatment. Thereafter, use 8oz. per week. This should be poured directly into toilet and flushed. If septic tank has become clogged or odorous, add 1 gallon of product directly to the tank through manhole.
Uric acid:
Remove as much solid waste as possible. Spray area where odor is origination, (urinals, toilets, or flooring and walls around washroom, carpet). Precaution, when using on carpet, spray inconspicuous area first. Do no saturate.
Porta-toilets:
Add one gallon directly. Cover the solids with water to aid digestion. Hydrocarbon Spills:
Carpet cleaning:
Dilute 1 gallon of Super S.E. with 2 gallon of water in a pump up sprayer and saturate spill area with mixture. Surfactants in Super S.E. will aid in breaking up oil and bacteria aid in the bioremediation of the contaminated area. Repeat this procedure until sheen disappears. Keep area moist if possible.